Cement & Concrete Aggregates Testing Equipment's
|Vibrating Range (Amplitude)||>5 mm|
|Max Weight||400-800 kg|
|Table top||50 cm x 50 cm|
|Load carrying capacity||140 Kg|
|Frequency||3600 - 2600 vibrations per minute|
Details: The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet. The vibrations are imparted by means of off-balance masses rotating on a shaft of a vibrator clamped to the underside of the table top and has stops along its edges to prevent moulds from walking off the table during vibration. A cross arm adjustable on a vertical rod at the center of the table is provided to hold the moulds while operating the table. A speed regulation handle is provided for increasing or decreasing the frequency.
Note: Vibrating Tables of Tables top size 75cm x 75cm as well as 100cm are also available.
- Item Code: ASI-590
Concrete Pan Mixer
|Motor Power||11 kW|
|Power||3 HP TO 7.5 HP|
Tensile Strength Tester
|Load Capacity||1-5000 N|
|Test Speed||1-999 mm/min|
- Item Code: ASI-214
Electrically Operated Tensile Strength Tester
|Test Speed||1-999 mm/min|
Details: The instrument employs a friction- free, accurate, double lever system, the load being applied by means of sliding weight on the top lever. After fixing the briquette in the jaws, the machine is switched on. The sliding weight slides over the calibrated lever thus applying tension to the specimen.
Small Concrete Test Hammer
|Power||Hydraulic, 0.75 kW|
|Measuring Range||10-70 N/mm|
|Impact energy||2207 J|
- Item Code: ASI-631
|Motor Power||3 H.P|
|Disc Diameter||175 mm|
|Maximum Feed size||6 mm|
|Size of Finished Product||100 mesh|
Grinding is done between two discs-one stationery and the other revolving eccentrically at high speed. The discs are made from heat treated machinate metal. With the help of a convenient hand wheel, the size of the final product can be adjusted. This can be done, even while the machine is in operation. A self locking device holds the hinged grinding chamber in place and affords easy and quick access to it, for removal of ground samples and for cleaning.
- Item Code: ASI-235
Small Roll Crusher
|Rollers||100 mm and 250 mm dia|
|Motor Power||3.0 H.P|
|Voltage||440 V 50 Hz|
|Feed Size||10 mm|
|Product Size||2.00 mm and below|
- Item Code: ASI-236
Large Roll Crusher
|Roller size||150 mm and 250 mm|
|Motor Power||5.0 H.P|
|Voltage||440 V 50Hz|
- Item Code: ASI-237
Aggregate Impact Tester
|Size||75 mm dia. x 50 mm|
|Tamping rod length||230 mm|
|Hammer weight||13.75 and 0.25 kg|
|Tamping rod diameter||10 mm|
As Per IS: 2386 (Part-IV) 9377
- Item Code: ASI-309
ASI Rebound Hammer
|Is It Portable||Portable|
Los Angles Abrasion Testing Machine
|Ball diamter||48 mm|
Used for testing crushed rock, crushed slag, crushed and uncrushed gravel for resistance to abrasion.
Components: The machine consists of a hollow cylinder mounted horizontally on a study frame on ball bearings. There is an opening which can be closed with a dust tight cover to facilitate charging and discharging the drum with the material under test. A detachable shelf which extends throughout the inside length of the drum which catches the abrasive charge and does not allow it to fall on the cover. A revolution counter is fitted to the frame. A tray is supplied for collection of the material at the end of the test.
As Per IS: 2386 (Part IV) ASTM: C 131, AASHP T 96
- Item Code: ASI-315
|Table top diameter||250 /2.5 mm|
|Table top material||Brass|
- Item Code: ASI-523
Flexure Testing Machine
|Pressure gauge||0-100 KN x 1 KN|
|Dimensions||15 cm x 15 cm x 70 cm|
|Power||Hydraulic, 0.75 kW|
- Item Code: ASI-643
Tile Flexure Testing Machine
|Lead Metal||20 Kg|
|Rollers||40 mm or 12 mm dia|
Unit for finding flexural strength of clay roofing tiles and Cement flooring tiles. Flexural load is applied on the tiles using lead shots. The third upper roller applies centrally flexural load by means of lever arrangement.Arrangement is made such that loading automatically stops when specimen breaks. Supplied without lead shots.
Accessory: Lead shot supplied in packs of 20Kgs.
- Item Code: ASI-644
Tile Abrasion Testing Machine
|Specimen size||7.06 cm x 7.06 cm|
|Load applied||30 kgf|
|Voltage||440 volts AC|
A bracket is provided to hold the specimen. A counter balance lever loads the specimen. A funnel is fitted to evenly spread abrasive powder on the grinding path. A pre-set counter automatically stops the machine after 22 revolutions. This counter is re-adjustable.
- Item Code: ASI-645
Aggregate Crushing Value Apparatus
|Container size||150 mm x 130 mm|
|Base plate thickness||200 to 230 mm/sq x 6 mm|
|Plunger size||148 mm x 100 mm|
|Tramping rod length||16 mm dia x 600 mm|
As Per IS: 9376, 2386 (Part-IV)
Note:- On special request Aggregate Crushing Value apparatus having 75mm dia. or 300mm dia. cylinder size can be supplied.
- Item Code: ASI-308
Compaction Factor Apparatus
|Tamping rod diameter||16 mm|
|Tamping rod length||600 mm|
- Rust proof
- Fine finish
- Tough construction
- It consists of two rigid conical hoppers and a cylinder mounted
- The lower openings of the hoppers are fitted with hinged trap- doors having quick release catches
- A circular meter plate is provided to cover the top of the cylinder
- Item Code: ASI-519
Laboratory cement Autoclave
|Mount Type||Floor Mounted Autoclave|
|Automation Grade||Semi Automatic|
Concrete Permeability Apparatus
|Pipe Length||50 to 100 mm, 500mm|
We hold specialization in offering Concrete Pemeability Apparatus to the clients. Concrete Pemeability Apparatus is manufactured with ultra grade raw material and latest technology under the guidance of professional in accordance with the quality standards. This product is widely praised by the clients for smooth functionality and long service life. Offered range is duly checked on various parameters of quality in order to deliver a defect-free range at clients' end. This product is available in various specifications and sizes to the esteemed clients.
- Easy installation
- Optimum performance
- Safe to use
- Item Code: ASI-635
|Voltage||230 V AC|
- High efficiency
- Excellent performance
- Longer service life
- Item Code: ASI-525
Dorry Abrasion Testing Machine
For testing aggregates for resistance to abrasion.
Components: It consists of a disc rotating about a shaft connected to a reeducation gear box coupied to a motor. Under the rotating disc is a tray with an outlet to facilitate the removal of sand. Two conical hoppers are mounted on a bracket fixed to the circular tray. An arrangement is made for start and stop the flow of sand. Two holes are provided for mounting two specimens simultaneously. Two containers with weights are supplied to keep the specimens pressed against the rotating disc.
- Item Code: ASI-313
Deval Attrition Tester
|Shaft angle||30 deg|
|Shaft speed||30-33 RPM|
|Ball diameter||48 mm|
Components: It consists of two hollow cylinders closed at one end and provided with tight fitting covers at the either end through a reduction gear operated by a motor and is provided with a revolution counter. Complete with abrasive charges consisting of 12 Nos.
As Per IS: 2386 (Part-IV) ASTM D 2, D 289.
- Item Code: ASI-312