OIL & PETROLEUM TESTING INSTRUMENTS LAB EQUIPMENTS

Product Details:

It is used for determination of heat of combustion , calorific value and sulphur contents of solid and liquid fuels. The Bomb body and lid are machined from corrosion resisting stainless steel rod . It's capacity is approx .300ml .It is provided with high pressure valve and electrodes. The calorimeter vassel and electrodes. The calorimeter vassel /stirrer FHP motor are provided and water jacket as per IP. The Bomb calorimeter is supplied with firing unit ,Digital /Glass Beckman Thermometer, Pallet press ,ignition Nichrome wire and pressure gauge with copper pipe fitting .

ASI - 557 Bomb Calorimeter Apparatus. Glass Backman thermometer.
ASI - 557 A Bomb Calorimeter Apparatus. Digital Backman thermometer.
ASI - 557 B Bomb Calorimeter Apparatus. digital Backman thermometer with printer.

Optional Accessories:

ASI -557/A Spare Bomb 300ml capacity.
ASI -557/B Spare Neoprene washer for Bomb.
ASI -557/C Spare Stainless Steel crucible
ASI -557/D Spare Motor Belt.

Additional Information:

• Delivery Time: 10 DAYS

Product Details:

Made of stainless steel bath big enough to accomodate 3 cups Redwood No.1 and 2 cups of Redwood No.II. Stirring is done by a FHP electric motor in the bath. It is supplied complete with 5 Oil cups fitted with Precision jets of Stainless Steel. Temprature is controlled by Energy Regulator

Note :- Digital temprature controller cum indicator can be supplied at an extra cost.

Optinal Accessories For Red Wood Viscometer No. I,II & Multiple Red Wood Viscometer :

1. ASI-433/A  IP 8C Low range Thermometer.
2. ASI-433/B IP 9C Medium range Thermometer.
3. ASI-433/C IP 10C High range Thermometer.
4. ASI-433/D Flask receiver 50 ml capacity.
5. ASI-433/E Polished carrying wooden case for Red wood No.I.
6. ASI-433/F Temprature regulator (Energy regulator).
7. ASI-433/G Spare cup with valve for Redwood No.I.
8. ASI-433/H Spare cup with valve for Redwood No.II.
9. ASI-433/I Polished carrying wooden case for Redwood No.II.
10. ASI-433/J Spare Heater for Red Wood No.I.
11. ASI-433/K Spare Heater for Red Wood No.II.
12. ASI-433/L Spare Ball valve for Red Wood No.I & II.
13. ASI-433/M Digital temprature controller cum indicator for Red Wood No I & II.

Product Details:

The appartus is used for determination of Flash Point & Fire Point of Petrolrum products except fuel oil with open flash 800C as per specification IP 36/57, IS 1448(P:69) 1969 and ASTM-D-92-67. The apparatus consists of a cup heating plate to specific dimensions thermometer clip and test flame attachment with swivel joint for passing over liquid surface in the prescribed manner, heater is controlled by means of different types of regulators fitted to the apparatus suitable for operation on 220 Volts AC mains.

Optional Accessories:

Additional Information:

• Item Code: ASI
• Delivery Time: 7-10DAYS
• Packaging Details: BOX

Product Details:

ASI FLASH POINT (CLOSED) - PENSKY-MARTENS TYPE APPARATUS: -

  • The apparatus must be in compliance with IS: 1209, IS: 1448(Part 21), ASTM D93, ISO 2719 and DIN 51758.
  • The apparatus must be supplied with Oil Cup made of brass fitted with a thermally insulated handle and a shutter opening mechanism for easy removal of cup lid by rotating the handle to disengage the cams.
  • The apparatus must have Electrical Heating with test jet and electric heater with energy regulator.
 • The apparatus must be suitable for operation on 220 V, 50 Hz, single phase AC supply.

Product Details:

Used for determing the Viscosity of lubricating and fuel oils in accordance with continental emulsions. It consists of Stainless steel water bath having oil cup with double walled lid.The water bath with stirring device mounted on stand . A thermometer clip to the water bath and the oil cup lid has a thermometer socket. The bath is fitted with 500 watts heater . It is supplied with wooden or ebonite valve to fit jet (without glaswares). Can operate on 220 Volts AC mains.

ASI-563     Engler Viscometer Gas Heated Modal Without burner.
ASI-564     Engler Viscometer Electric heated without any control.
ASI-565     Engler Viscometer electric heated with separate energy regulater control.
ASI-566A   Engler Viscometer electric heated with copper coil type voltage varric.
ASI-566AA Engler Viscometer electric heated with digital temperature controller cum indicator.

Optional Accessories:

1. ASI-563/A   Ebonite or wooden valve
2. ASI-563/B   Flask 200ml capacity
3. ASI-563/C   Polished wooden case.
4. ASI-563/D   Thermometer ASTM 23C or 24C or 25C any one.

Product Details:

This Viscometer bath is used to maintain the correct constant temperature for estimating Kinematic Viscosity of Oil and Petroleum Products in this type of bath various viscometers may be fixed as an internal part of the bath.The bath is rectangular shape.Inside tank is made of Stainless Steel Sheet. Two sides toughed glass window provided for full visibility of objects inside the bath. The bath is controlled by an electronic relay and contact Thermometer Or Digital Temperature controller cum indicator.Temperature range 50C above room temperature to 1000C. Accuracy plus minus 0.10C. Stirring is done by a FHP electric motor stirrer.Heating is done by means of tubuler type heater fitted on top of the bath.It is supplied with viscometer tube holders and stainless steel cover. Different size & accomodation are available as under without Viscometer tube.

Optional Accessories:

Note :
1. Please mention correct size and viscosity range of viscometer tubes with indent/order.
2. 'U' Tube with constant test certificate at an extra cost for each tube.
3. A circulating pump instead of stirrer can be provided on the extra cost.
4. Powder coating instead of enamal paint can be also be provided at extra cost.

Product Details:

Used for detecting the presence of corrosive sulphur in petroleum products.The apparatus consists of a bath either dual purpose (500C & 1000C) or a boiling bath (1000C only) without stainless steel bomb and copper strips of definite size 6 bombs or 18 test tubes can be accomodate in each type of bath with different temperature regulation system to operate on 220 volts AC. mains.

Optional Accessories:

Additional Information:

• Delivery Time: 20 DAYS