Product Details:
Brand | ASI |
Country of Origin | Made in India |
The unit comprises of a base frame on which the frame assembly with the integral jack and two load gauges with isolating valves are fixed. The ram of the jack carries the lower cone while the upper cross head has the other loading cone. The cones are made as per IS 8764. Spacer blocks are provided to test samples ranging from EX size to 100 mm size. Maximum clearance between the two cones is approx 125 mm. Lower range gauge of 25 kN is provided for better sensitivity and 100 kN gauge reaches upto the maximum capacity.
Additional Information:
Product Details:
Brand | ASI |
Country of Origin | Made in India |
The unit comprises of a base frame on which the frame assembly with the integral jack and two load gauges with isolating valves are fixed. The ram of the jack carries the lower cone while the upper cross head has the other loading cone. The cones are made as per IS 8764. Spacer blocks are provided to test samples ranging from EX size to 100 mm size. Maximum clearance between the two cones is approx 125 mm. Lower range gauge of 25 kN is provided for better sensitivity and 100 kN gauge reaches upto the maximum capacity.
Additional Information:
Product Details:
Brand | ASI |
Country of Origin | Made in India |
Rock Permeability
The instrument meets the essential requirements laid down in IS:4348-1973.
It is single panel unit on which are mounted a set of valves, pressure gauge, pressure regulator, brass water reservoir, graduated glass tube etc.
The outlet of the reservoir is connected to the top of the permeability cell. It is made out of non-corrosive material or MS chemically coated for rust protection.
Air-vent valve is provided on the top plate, while at the bottom a funnel is fixed through which passes the percolated water to the measuring bottle.
Cell can accommodate 100 mm dia x 100 mm high specimen.
Additional Information:
ACCELERATED (ROAD STONE POLISHING MACHINE WITH ONE MOULD)
IS : 2386 (PART-IV) 1963
PRODUCT SPECIFICATION
Automatic Grade |
Fully-automatic |
Power (HP) |
5hz |
Machine Capacity |
10 to 50ltrs |
Voltage |
230 v |
Product type |
Polishing Machine |
Weight |
Approx 30kg |
PRODUCT DESCRIPTION
Assisted by a qualified workforce and advanced manufacturing unit, we are engaged in offering a wide range of Accelerated Polishing Machine. This machine has two speed constant mesh gear box driven by an electric motor fully enclosed within the transmission case. The low speed drive automatically comes into action when either the high or intermediate speed is disengaged on light loads, speed changes may be made without switching off. A gear train to provided smooth gear changes and also protects the transmission mechanism. Ball bearings are used throughout which, together with all gears, run in a special lubricant requiring no attention for several years.
FEATURES:
· High tensile strength
· Accurate measurement
Operator friendly control
Product Details:
Height | 1300 mm |
Base | 600 x 1200 mm |
Drill Speed for soft samples | 900 RPM |
Drill Speed for hard samples | 350 RPM |
Input power | 2450 W |
Material | Stainless steel |
Type | Motorized |
We are one of the leading organizations that are engaged in manufacturing, supplying and trading high quality Core Cutting also known as Core Drilling Machine (Motorized). All these machines are suitable to cut or drill cores of concrete, rocks, stoned, tiles or the similar material. The machine is suitable for core samples of size up to one fifty mm diameter. Our range has sturdy base with pillar support in which rack and pinion are provided for adjustment in height and penetration assembly.
Features:
Additional Information: