A.S.I.Sales Private Limited

➢ Hydraulic system control, more high working efficiency ➢ Touch screen programmable control ➢ Automatic hot mounting press process ➢ Equipped emergency stop button, safe operation ➢ With water cooling system, fast cooling down ➢ Interchangeable mold assembly kits Ø 25 / 30 / 40 / 50mm 

➢ Hydraulic system control, more high working efficiency ➢ Touch screen programmable control ➢ Automatic hot mounting press process ➢ Equipped emergency stop button, safe operation ➢ With water cooling system, fast cooling down ➢ Heating rods instead of hearing wire, high work efficiency 

Product Features:

1. ACM-4T Cutting Machine can be used to cut metal sample

2. The machine adopts closed structure, large observation window, use safe   

3. Quick clamping mechanism, easy to clamp sample

4. Have a special cooling water tank, for circulating cooling liquid

5. Main components such as jaw and work surface adopts stainless material, long service life

Main Technical Specifications:

SAFE & EASY CUTTING DESIGN

 

Rotate type Hand wheel

Abrasive wheel Move smoothly

Save effort, get much better quality sample than traditional manual cutter

• T slot beds and sliding vises structure make hold sample very easy
• Water cooling system protect your sample in good quality
• Abrasive cutting disc easy to change

STANDARD ACCESSORIES:

ASI AUTOMATIC MOUNTING PRESS

 Mounting Pressis a mechanical type machine. By turning the hand-wheel of the machine, a couple of bevel gear is rotated to drive the screw rod which in turn pushes/pulls the lower die up and down along the mould sleeve. The thermo set plastics together with specimen being mounted is formed under heated conditions. During  this  process  the  pressure  is  self-adjusted  by  a  spring  fixed  inside  the machine. A signal light is used to indicate the pressure level

 The mounting press is equipped with a digit temperature controller to establish real-time temperature meanwhile, a timer is equipped to realize the semi-automation of sample – making, while obviously increasing working efficiency. For each specimen-mounting, 8-10 minutes is enough and a mirror-like specimen can be acquired.

 

SPECIFICATION:

·         Specimen Pressing Size: Ø 30x15mm

·         Heater Capacity: 650W 220V

·         Adjustable Temperature Range: 0-400ºC

·         Power: 15% 220V 50Hz voltage fluctuation less than + 15%

·         Overall Dimensions: 340mm X 270mm X 400mm
Weight: 25kg (approx) 

Product Feature:
1. Super cost-effective, stable quality, complete functions, DIY can be customized according to different requirements of customers.
2. The machine base is made of aluminum alloy material, which is cast in one piece, light in weight, good in shock absorption, and anti-corrosion.
3. Single working plate, standard plates dimension 254mm, 50% larger than normal grinding - polishing machine
4. One time can polishing 6 pieces of diameter 30mm samples.
5. The shell is made of high-end ABS, which has a novel appearance and high-end atmosphere.
6. Built-in nozzle sewage collection tank, automatic cleaning.
7. The touch screen display control, the interface is clear and intuitive, and the operation is simple.
8. The testing time, rotating speed and pressure can be set.
9. The grinding head is automatically locked with electromagnetic clutch, which is convenient and quick operation (optional purchase).
10. Stepless speed regulation 100-1000r/min or four constant speed regulation (customer can define three common speeds for pre-grinding, grinding and polishing).
11. It can store 100 groups of grinding and polishing programs for quick recall.
12. The magnetic disc design supports quick disc change, and the replacement of sandpaper and polishing cloth is more efficient.
13. The free-rotating design of the sample chuck, with the internal lighting system, is convenient for taking and placing the sample.
14. The whole machine adopts a three-phase silent motor and a stepping motor, with stable rotation, low noise and long life.
15. Automatic centering to prevent multi-faceted grinding and polishing

Technical Specifications

 

AMP-1 metallographic sample mounting press is designed for mounting small or irregular shape and those difficult to hold samples, which is former procedure of grinding and polishing. The inlaying operation serves to facilitate the grinding and polishing operations of the specimens and the routine observation of the composition of the material under the metallographic microscope.

 

Working environment:

 

The relative humidity of air should be no more than 85% (20 °C).

The voltage fluctuation should be no more than 15%.

There should be no obvious vibration source around.

There should be no current conducting dust, explosive and corrosive air.

 

 

Main Parameters:

 

ASI ABRASIVE CUTTING MACHINE

 

Abrasive Cutter Is Rugged, Sturdy And Designed To Cut Metallurgical Samples To Optimal Quality Consistently And Safely. Cutting Wheel Mounted On The Spindle To Get The Optimum Output Of the Motor.

The Movement Of Cutting Wheel Towards The Specimen Is Applied By Handle fixed With Motor Base Pivotspindle And The Cutter Unit Is Balanced By Springs For Smooth Downward.
Features

·         Table Top model cutter for sectioning metals ceramic and mineral

·         Cutting capacity up to 50mm

·         Spindle speed 1400rpm and cut-off wheel dia 8" (Max.)

·         Cutting motor 2 HP

·         Electrical Power Supply 3 Phase, 440 Volts

·         Self centering Vice with 360 rotation jaw opening 2"

·         Splash proof, corrosion resistant with see through hood

·         Cooling by two high flow water jets to provide optimum cooling

·         Coolant Tank for Capacity 20 Liter

Product Features: 

1. ACM-3T Cutting Machine can be used to cut metal sample

2. The machine adopts closed structure, large observation window, use safe   

3. Quick clamping mechanism, easy to clamp sample

4. Have a special cooling water tank, for circulating cooling liquid

5. Main components such as jaw and work surface adopts stainless material, long service life 

Main Technical Specifications:

 

 

STANDARD ACCESSORIES:  

Product Features: 

1. ACM-5T Cutting Machine can be used to cut metal sample

2. The machine adopts closed structure, large observation window, use safe   

3. Quick clamping mechanism, easy to clamp sample

4. Have a special cooling water tank, for circulating cooling liquid

5. Main components such as jaw and work surface adopts stainless material, long service life 

Main Technical Specifications:

 

SAFE & EASY CUTTING DESIGN

 

Rotate type Handwheel

Abrasive wheel Move smoothly

Save effort, get much better quality sample than traditional manual cutter

 

• T slot beds and sliding vises structure make hold sample very easy
• Water cooling system protect your sample in good quality
• Abrasive cutting disc easy to change

 

1. Vernier Caliper external Measurement Range (mm) 0-2000 mm 2. Jaw Type Type B - With jaws on one side for external and internal measurements 3. Minimum ID Measurement (+/-10%) 40 mm 4. Least Count / Resolution O.02 mm 5. Accuracy (Maximum error in reading) at 20 deg C (+/-) 0.12 millimeter 6. Jaw Length (+-10%) 180 millimeter 7. Provide URL of the catalogue by seller for verification technical terms URL to be mention 8. Type of Display Graduated Scale 9. Salient feature/Functions Thumb Roller, Locking Screw, Fine Adjustment Thumb Wheel/roller 10. Material of the main parts of Calipers such as beam, slidingjaw and depth measuring blade Hardened Stainless Steel 11. Quality of the main parts of Calipers such as beam, sliding jaw and depth measuring blade Generally conforming to lS: 3651 (latest) for metallic parts 12. Finish Polished
OPERATING CONDITIONS: 1. Minimum Operating Temperature 0 degree Celsius 2.Maximum Operating Temperature 70 degree Celsius 3.Maximum Operating Humidity at 40 deg C (Rh) 95 percent 4.Calibration Certificate to be Provided along with supplies Yes 5.Standard accessories inclusive in the scope of supply Carrying case 6.Calibration Certificate issuing authority :Test and calibration certificate from OEM or Government/ NABL/ ILAC accredited lab or equivalent to e conformity of specifications