- Home
- ยป
- Our Products
- »
- Sample Preparation Equipments
Sample Preparation Equipments
Double Disc Polishing Machine
Minimum Order Quantity: 1 Piece
Power | 0.25 |
Material | Aluminium |
Disc diameter | 200 mm |
Speed | 950 RPM |
Voltage | 220 Volt A.C |
Features:
- Easy to use
- Excellent performance
- Minimal maintenance required
Additional Information:
- Item Code: ASI-1003
- Delivery Time: Ready Stock
Metallurgical Cutting Machine
Minimum Order Quantity: 1 Piece
Material | Mild Steel |
Phase | Three Phase |
Model Name/Number | ASI-CUT75 |
Country of Origin | Made in India |
Abrasive cutter is rugged, sturdy and designed to cut Metallurgical Samples to optimal quality consistently and safely . Cutting Wheel spindle is connected with motor shaft by pulley and belt mechanism. The movement of cutting wheel towards the specimen is applied by handle fixed with motor base pivot spindle and the cutter unit is balanced by springs for smooth chop type movement. Corrosion resistant window. Cooling by two high flow water jets to provide optimum cooling. Large (25mm) drain, re-circulation coolant tank with 30LTR. Capacity Working on 440 volts, AC main supply with coolant tank of sufficient capacity. The chop type cut off wheel machine is suitable for quick and clean cutting of metallography specimen from rods & tubes etc.
Features-
· X-Y Movement Vice is made up of M.S, Specially designed.
· Coolant circulation System is provided with suitable filtering arrangement.
· Light attachments system is provided for clean and accurate cutting of samples.
· Heavy Duty motor is provided 3 H.P , 3 Phase.
· Large Viewing window to monitor the cutting operation.
Technical Data-
· Operation -Manually by moving motor to cut the sample.
· Cutting Operation :- By manual cutt-off wheel in chop type procedure.
· Cutting Motor Power :- 3H.P,3 Phase.
· Coolant Motor Power :- Tullu Pump.
· Cutt-Off Wheel Speed :- 1400 RPM.
· Dimensions :- 600mm W x 750mm D x 1000mm H. (Approx.).
· Cutting Capacity :- 10-60mm.
Additional Information:
- Delivery Time: Ready Stock
Metallurgical Polishing Machine
Polishing disc | 20 mm |
Speed of disc | 350 to 1200 RPM |
Voltage | 220/230 V AC |
Model | SL 806 |
Material | Stainless steel |
Automatic Grade | Manual,Semi-automatic |
Metallurgical Polishing Machine
This is a simple and convenient machine for rough and fine polishing of metallurgical specimens. The specimen after mounting and after being polished by hand on emery paper is polished finally on this machine. The specimen is held against a rotating flat disc, on which a polishing cloth, impregnated with suitable polishing media such as silicon carbide powder, alumina of diamond powder, is stretched. Disc polishing gives the specimen a scratch free mirror like finish.
The spindle is located on heavy duty ball bearing. The disc is easily removable for quick changing of the polishing cloth or paper, which is fastened on the disc by means of a spring or rubber girdle on the rim of disc. Around the disc. is an aluminum drain jacket fitted with drain tube. A metallic reservoir is also provided for dropping water on the specimen. The machines are made in single. Double and three disc model.
Additional Information:
- Item Code: ASI-806A
Automatic Metallurgical Polishing Machine Single Disc
Minimum Order Quantity: 1 Piece
Type | Semi Automatic |
Automation Grade | Semi-automatic |
We have gained a remarkable position in the industry by offering a qualitative assortment of Semi-Automatic Polishing Machine Singe Disc. These polishing machines are accessible in numerous specifications as per the variegated demand of customers. The offered polishing machines are developed using optimum quality material and sophisticated technology keeping in sync with standards of market. Additionally, we offer these polishing machines after examine them properly on numerous parameters.
Features:
- Reliable performance
- Accurate results
- Durability
Specifications:
- Grinding and Polishing Wheel Diameter: 250mm
- Abrasive Paper Diameter: 250mm
- Platen Speed: 100-1000rpm
- Operating conditions 10 to 40°C
- Electronic control with LC-Display with digital timer/Touch Screen
- Independent polishing head motor
- 1 HP High torque AC motor
- 10” Aluminum Disc hold up to 3 moulds(30/45mm)
- Variable Speed 50-600 RPM
- Specimen Preparing Time 0-99Min.
Additional Information:
- Delivery Time: Ready Stock
Metallurgical Polishing Machine Single Disc
Minimum Order Quantity: 1 Piece
Machine Capacity | ASI-METAPOL |
Speed | 900 |
Disc Diameter | 8" |
Since our inception, we are instrumental in offering premium quality Digital Polishing Machine (Table top). The offered polishing machines are acknowledged in the market due to its user friendly design. These polishing machines are manufactured by utilizing best in class material & contemporary technology at our advanced manufacturing unit. We are providing these polishing machines in various specifications for meeting the needs of customers.
Features:
- Compact size
- Hassle free performance
- Low maintenance
Other Details:
- High performance
- Maintenance free
- Corrosion resistance
- Robust construction
Specifications:
- 1/4HP AC motor
- 8" disc diameter Standard
- Many discs can be used
- Variablespeed controller
- Digital speed indicator - 100 to 1250 rpm
Additional Information:
- Delivery Time: Ready Stock
Digital Polishing Machine DC Drive
Minimum Order Quantity: 1 Piece
Model Name/Number | ASI-METAPOL D |
Speed | 900 |
Disc Diameter | 8" |
Since our inception, we are instrumental in offering premium quality Digital Polishing Machine (Table top). The offered polishing machines are acknowledged in the market due to its user friendly design. These polishing machines are manufactured by utilizing best in class material & contemporary technology at our advanced manufacturing unit. We are providing these polishing machines in various specifications for meeting the needs of customers.
Features:
- Compact size
- Hassle free performance
- Low maintenance
Other Details:
- High performance
- Maintenance free
- Corrosion resistance
- Robust construction
Specifications:
- 1/2HP high torque DC motor
- 8" disc diameter Standard
- Many discs can be used
- Thyristor controlled speed controller
- Digital speed indicator - 100 to 900 rpm
Additional Information:
- Delivery Time: Ready Stock
Metallurgical Automatic Cut Off Machines
Minimum Order Quantity: 1 Piece
Model Name/Number | ASi-CUT-AUTO |
Standard Accessories | Cut Off Wheel |
Guaranty | 2 years |
Abrasive cutter is rugged, sturdy and designed to cut Metallurgical Samples to optimal quality consistently and safely . Cutting Wheel spindle is connected with motor shaft by pulley and belt mechanism. The movement of cutting wheel towards the specimen is applied by handle fixed with motor base pivot spindle and the cutter unit is balanced by springs for smooth Chop Type/ Automatic movement. Corrosion resistant window. Cooling by two high flow water jets to provide optimum cooling. Large (25mm) drain, re-circulation coolant tank with 30-100LTR. Capacity Working on 440 volts, AC main supply with coolant tank of sufficient capacity.
Specifications:
- Heavy duty sectioning machine for large cross sections, irregular components, in short time.
- Cutting wheel swings also with the oscillation movement for faster large sectioning than the chop type.
- Heavy duty motor is provided 10/15 HP 3 phase.
- Machine is covered with powder coated sheets or stainless steel sheets.
- Specially designed heavy steel vice to hold any kind of piece.
- Absolute minimal deformation, cool & burn-free sample production.
- Large and effective coolant delivery with adjustable focused vains fitted on wheel guard.
- Coolant circulation system is provided with suitable filtering arrangement.
- Double light attachments system is provided for clean and accurate cutting of samples.
- Large viewing window to monitor the cutting operation.
Technical Data-
· Operation -Manually/Automatic moving motor to cut the sample.
· Cutting Operation :- By manual/Automatic cutt-off wheel.
· Cutting Motor Power :- 10/15H.P,3 Phase.
· Coolant Motor Power :- Tullu Pump.
· Cutt-Off Wheel Speed :- 1440 RPM.
· Cutting Wheel :- 350 x 2.5 x 31.75
· Cutting Capacity :- Upto 150mm.
Additional Information:
- Item Code: -
- Production Capacity: -
- Delivery Time: 3-4 Weeks
- Packaging Details: As per customer requests.
Automatic Mounting Press With Touch Panel
Minimum Order Quantity: 1 Piece
Automation Grade | Automatic |
Model Name/Number | ASI-MOUNT-A |
Brand | ASI |
Control Panel | Touch Screen |
AUTOMATIC SPECIMEN MOUNTING PRESS
This Machine is Automatic Mounting Press for metallographic specimen. It is suitable for all Thermosetting Materials, because of the cooling system. It can automatically finish with the heating temperature, the holding time and acting force. The operator can change 4 specification patterns according to the difficult specimens. It can make 2 specimens at one time.
*SPECIFICATION:
Pattern specimen : 25mm, 30mm, 40mm, 50mm
Power: 220V 50Hz
Maximum consumption: 1800W
Pressure: 0~2Mpa
Temperature: 0~300°C
Holding time: 0~99minutes
Out line dimension: 615 x 510x 500mm
Weight: 110Kg
Cooling: Water cooling
Additional Information:
- Delivery Time: Ready Stock
Metallurgical Mounting Press
Minimum Order Quantity: 1 Piece
Automation Grade | Manual |
Model Name/Number | ASI-MOUNT-M |
Brand | ASI |
MOUNTING PRESS is a mechanical type machine. By turning the hand-wheel of the machine, a couple of bevelgear is rotated to drive the screw rod which in turn pushes/pulls the lower die up and down along the mould sleeve. The thermo set plastics together with specimen being mounted is formed under heated conditions. During this process the pressure is self adjusted by a spring fixed inside the machine. A Signal light is used to indicate the pressure level.
SPECIFICATION:
Specimen Pressing Size: 22x25mm, 30x25mm, 45x25mm
Heater Capacity: 650W 220V
Adjustable Temperature Range: 0-400C
Power: 220V 50Hz voltage fluctuation less than + 15%
Overall Dimensions: 340mm X 270mm X 400mm
Weight: 35kg (approx)
Additional Information:
- Delivery Time: Ready Stock
Automatic Mounting Machine
Minimum Order Quantity: 1 Piece
Automation Grade | Automatic |
Model Name/Number | ASI-MOUNT-A |
Brand | ASI |
AUTOMATIC SPECIMEN MOUNTING PRESS
This Machine is Automatic Mounting Press for metallographic specimen. It is suitable for all Thermosetting Materials, because of the cooling system. It can automatically finish with the heating temperature, the holding time and acting force. The operator can change 4 specification patterns according to the difficult specimens. It can make 2 specimens at one time.
*SPECIFICATION:
Pattern specimen : Φ25mm, Φ30mm, Φ40mm, Φ50mm
Power: 220V 50Hz
Maximum consumption: 1800W
Pressure: 0~2Mpa
Temperature: 0~300°C
Holding time: 0~99minutes
Out line dimension: 615 x 510x 500mm
Weight: 110Kg
Cooling: Water cooling
Additional Information:
- Delivery Time: Ready Stock
Metallurgical Belt Polisher
Minimum Order Quantity: 1 Piece
We are a well-renowned manufacturer, exporter and supplier of a wide range of the best quality Belt Polisher that is designed for initial rough grinding. In order to manufacture this polisher as per the prevalent industry norms, our seasoned professionals use superior quality raw material and cutting-edge technology at our sophisticated manufacturing unit. This polisher is widely used in pharmaceutical, chemical and various other industries. Available in various specifications, we offer this Belt Polisher as per the specific needs of clients.
Features:
- Strong construction
- Optimum performance
- Easy to use
- Corrosion resistance
Specifications:
- Working on: 220V in single phase
- Operation: Manual
- Belt: 100/915mm Endless Belt
- Pulleys System: Balanced aluminum pulleys
- Polishing Motor power: ½ H.P, Single Phase
Additional Information:
- Delivery Time: Ready Stock
Spectro Sample Polisher
Minimum Order Quantity: 1 Piece
We have uniquely positioned ourselves as a dependable firm, engaged in manufacturing, exporting and supplying Spectro Sample Polisher. These sample polishers are expertly develop using top quality material & contemporary techniques in accordance with the set norms of industry. The sample polishers offered by us are tested on numerous parameters so as to eradicate all possible flaws. Moreover, we offer these sample polishers in a confine time at best price.
Other Details:
- Machine To Suite The Disc Housing And To Cover The Disc Plate By 180 Degrees For Safety
- Made Up Of Steel With Air Gripping Arrangement To Alundum Disc And With Locking System To Keep The Alundum Disc In Position
- At The Back Of The Disc Housing The Pipeline Connected To The Dust-Collecting Unit
- In Continues Process, There Is Noise Less Operation
- Anti Fungal, Rust Proof Paint
Specification:
- Abrasive Disc - 350mm Dia.
- Disc Motor - 2 Hp Or Better, 2800 Rpm (minimum Approx), 3ph, 50hz, 415 Vac Supply
- Suction Motor -0.5/ 1 Hp Minimum, 1440 Rpm, 415v Ac, 50hz, Tefc Type,
- Starter - Push Button D.O.L Starter Type With Overload Preventor,
- Disc Housing - Made Of Cast Iron And Machined To Suit The Disc Plate, Disc Cover And Machine Stand At The Back Of The Disc Housing The Pipeline Is Connected To The Unit For Collecting The Dust, Cooling The Polishing Disc And For Gripping It Uniformly At The Time Of Operation,
- Disc Plate - Made Of Steel With Air Gripping Arrangement Of The Polishing Disc And With Locking System To Keep The Polishing Disc In Position.
- Disc Cover - Machined To Suit The Disc Housing And To Cover The Disc Plate By 180 Degree For Safety,
- Machine Stand - Fabricated And Machined To Suit The Disc Housing. Main And Air Gripping Unit Motor Starters Are Fitted On The Machine Stand
- Air Gripping Unit - Fitted With Motor And Mounted On A Frame Placed On The Coming Fabricated Base,
- The Machine Shall Hold The Polishing Disc By Air Suction On The Disc Plate Which Rotates At A Speed Of 1440 Rpm (approx).
- The Air Suction Shall Hold The Polishing Disc Evenly Throughout The Surface And Collect The Dust From The Machine At The Time Of Finishing The Sample
- operation And Maintenance Manual.
Additional Information:
- Delivery Time: Ready Stock
Metallurgical Specimen Cutting Machine (Table Top)
Minimum Order Quantity: 1 Piece
Usage/Application | Automotive Industry |
Model Name/Number | ASI-CUT-50 |
Country of Origin | Made in India |
Abrasive Cutter Is Rugged, Sturdy And Designed To Cut Metallurgical Samples To Optimal QualityConsistently And Safely. Cutting Wheel Mounted On The Spindle To Get The Optimum Output Of the Motor.
The Movement Of Cutting Wheel Towards The Specimen Is Applied By Handle fixed With Motor Base Pivotspindle And The Cutter Unit Is Balanced By Springs For Smooth Downward.
Features
· Table Top model cutter for sectioning metals ceramic and mineral
· Cutting capacity up to 50mm
· Spindle speed 1400rpm and cut-off wheel dia 8" (Max.)
· Cutting motor 2 HP
· Electrical Power Supply 3 Phase, 440 Volts
· Self centering Vice with 360 rotation jaw opening 2"
· Splash proof, corrosion resistant with see through hood
· Cooling by two high flow water jets to provide optimum cooling
· Coolant Tank for Capacity 20 Liter
Additional Information:
- Delivery Time: Ready Stock
Linisher Polishing Belt
Model | SL 808 |
Belt size | 3 x 4 inch |
Power | 1/4 H.P |
Voltage | 230 V AC |
Working area | 4 x 7 inch |
Linisher Polishing Belt
Linisher is a continuous belt-sander. When the sample is irregular, its surface needs leveling in order to render it suitable for mounting. This is achieved on linisher belt.
The belt travels on two Aluminum pullies, one of which is directly coupler to motor. The other pulley is fitted on a spindle in a dolley which is spring loaded thus offering quick changing of worm out belts. The design also incorporates axial adjustment to align the belt in proper position.
This belt runs over a working surface plate situated between the two pullies giving a working surface of approximately 4” x 7” area. The sander is totally enclosed in a steel cover for safe operation. The cover can be easily removed for changing the belt.
Features:
- Axial adjustment screw for proper belt alignment.
- Spring loaded movable pulley giving even belt tension.
- Adjustable end arrest bracket.
Additional Information:
- Item Code: ASI-808