Cement & Concrete Aggregates Testing Equipment's

Product Details:

We are a preeminent organization involved in manufacturing, supplying and trading Compaction Factor Apparatus. Our range is used for determining the work ability of fresh concrete, provided the maximum size of the aggregate does not exceed thirty eight millimeters. Offered range consists of two rigid conical hoppers and a cylinder mounted on a rigid metal frame.

Features:

• Rust proof
• Fine finish
• Tough construction

Other details:

• It consists of two rigid conical hoppers and a cylinder mounted
• The lower openings of the hoppers are fitted with hinged trap- doors having quick release catches
• A circular meter plate is provided to cover the top of the cylinder

Additional Information:

• Item Code: ASI-519

Product Details:

We are offering a wide range of Aggregate Impact Tester which is used for determining the aggregate impact value.


As Per IS: 2386 (Part-IV) 9377

Additional Information:

• Item Code: ASI-309

Product Details:

We hold specialization in offering Concrete Pemeability Apparatus to the clients. Concrete Pemeability Apparatus is manufactured with ultra grade raw material and latest technology under the guidance of professional in accordance with the quality standards. This product is widely praised by the clients for smooth functionality and long service life. Offered range is duly checked on various parameters of quality in order to deliver a defect-free range at clients' end. This product is available in various specifications and sizes to the esteemed clients.

 

Features:

• Easy installation
• Optimum performance
• Safe to use

Additional Information:

• Item Code: ASI-635

Product Details:

The Vibrating Table is used for compacting concrete cubes and cylinders.

Details: The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet. The vibrations are imparted by means of off-balance masses rotating on a shaft of a vibrator clamped to the underside of the table top and has stops along its edges to prevent moulds from walking off the table during vibration. A cross arm adjustable on a vertical rod at the center of the table is provided to hold the moulds while operating the table. A speed regulation handle is provided for increasing or decreasing the frequency. 
Note: Vibrating Tables of Tables top size 75cm x 75cm as well as 100cm are also available.

Additional Information:

• Item Code: ASI-590

Product Details:

ASI Digital Concrete Rebound Hammer 
Automatically Record, Save, Calculateand Processing data.

Advantage • Voice broadcast function• 2.0inch HD color screen• Automatic display of mean and intensity• Direct charging of lithium battery• Connect to the PC terminal to transmit data• Wireless Bluetooth printing function• Stainless steel probe• High-end imported spring

Additional Information:

• Delivery Time: 1 WEEK

Product Details:

The rebound of an elastic mass depends on the hardness of the surface against which its mass strikes. When the plunger of the rebound hammer is pressed against the surface of the concrete, the Springcontrolled mass rebounds and the extent of such a rebound depends upon the surface hardness of the concrete. The surface hardness and therefore the rebound is taken to be related to the compressive strength of the concrete. The rebound value is read from a graduated scale and is designated as the rebound number or rebound index. The compressive strength can be read directly from the graph provided on the body of the hammer.      Features: • Economical • Impact Energy: 2.207 Nm • Accuracy: Better than + 2 Rebound Numbers when tested on Calibration Anvil • Resolution: 2 Rebound Number(s) • Range: 10 to 100 Rebound Number •Conforms to BS 1881: Part 202.IS 13311 Part 1, ASTM C-805 • Weight: 1.5 kg. • Travel Carry case   

Product Details:

SPECIFICATION:-

Los angeles abrasion Machine, Display Type Analog, Rotate speed:30-33 rotation/min, frequency50/60 Hz, voltage 22OV,Hollow steel cylinder mounted on a sturdy frame on ball bearings that is Capable of rotating about its axis in a horizontal position.

Product Details:

SPECIFICATION:-

Aggregate Impact testing Apparatus with cylindrical measure Size 75 mm dia. x 50 mm , Hammer weight 13.75 and 0.25 kg , Tamping rod diameter l0 mm , Material Stainless steel, manually operated seive with size 12.5mm,10mm,2.36mm

Product Details:

Dorry Abrasion Testing Machine

For testing aggregates for resistance to abrasion.

Components: It consists of a disc rotating about a shaft connected to a reeducation gear box coupied to a motor. Under the rotating disc is a tray with an outlet to facilitate the removal of sand. Two conical hoppers are mounted on a bracket fixed to the circular tray. An arrangement is made for start and stop the flow of sand. Two holes are provided for mounting two specimens simultaneously. Two containers with weights are supplied to keep the specimens pressed against the rotating disc.

Additional Information:

• Item Code: ASI-313

Product Details:

Being a customer focused organization; we are engaged in manufacturing, supplying and trading high quality Mortar Mixer. These mixers are used for mixing cement pastes, mortars and pozzolanas. Offered range consists of an epicyclic type stainless steel paddle imparting both planetary and revolving motion, by means of gears.

Features:

• High efficiency
• Excellent performance
• Longer service life

Additional Information:

• Item Code: ASI-525

Product Details:

SPECIFICATION :-

High Pressure Permeability Test can be conducted on different size specimens using different cells. Each cell should be made of steel and provided with a top plate and funnel at the bottom having gasket seals held in position through bolts and nuts. The concrete specimens can be sealed in the cells to prevent any leakage along the side walls. The permeated water should be collected in glass bottles attached at the bottom. Each test stall shall have its own control valves. The control Value should be mounted on a sturdy welded structural stand. All multi- units should be provided with end pressure gauges. Each unit is provided with chamber pressure gauges of 0-21 kg/cm2 and test pressure gauge of 0-17

.5kg/cm2. The Unit should be provided with Compressing assembly; water feeding Units and Power stabilizer.

Product Details:

Flexure Testing Machine(Electrically Operated) but instead of a hand pumping unit, a separate electrically cum hand operated pumping unit housed in a cabinet is supplied. On/off switch and a slow/fast level to control rate of loading are fitted on the front panel of the pumping unit. A facility for hand operation is provided. A micro switch and relay fitted inside the pressure gauge protects the unit from over loading.

Additional Information:

• Item Code: ASI-643

Product Details:

Large Roll Crusher comprises of two hardened alloy steel rollers. The rollers are fitted to a steel shaft and are mounted on heavy duty gunmetal bearings. The outside bearings are provided with heavy duty compression springs. Which help in increasing the space between the rolls, when a piece of material cannot be crushed. The drive is by a heavy motor, through 'V' belts, to a set of gears and further to the rollers. A hopper is provided for feeding the material.

Additional Information:

• Item Code: ASI-237

Product Details:

We are offering Electrically Operated Tensile Strength Tester. The machine can be made opratable for subsequent test only after the sliding weight to its zero position.

Details: The instrument employs a friction- free, accurate, double lever system, the load being applied by means of sliding weight on the top lever. After fixing the briquette in the jaws, the machine is switched on. The sliding weight slides over the calibrated lever thus applying tension to the specimen.

Product Details:

Tile Flexure Testing Machine

Unit for finding flexural strength of clay roofing tiles and Cement flooring tiles. Flexural load is applied on the tiles using lead shots. The third upper roller applies centrally flexural load by means of lever arrangement.Arrangement is made such that loading automatically stops when specimen breaks. Supplied without lead shots.
Accessory: Lead shot supplied in packs of 20Kgs.

Additional Information:

• Item Code: ASI-644

Product Details:

SPECIFICATION:-

Concrete Mixer Machine As per 15 1791. The total Drum Volume a However 3 Cu.Ft. Equipped with 0.5 HP Electric Motor Suitable operation on 220V/230V AC Single Phase Weight  ann/ 1.00 33600 00 Power Hydraulic 0.75 Kw, Material Steel

Product Details:

The Laboratory Pulverize is a disc type grinder, designed to grind virtually any material to produce a fine mesh sample in one operation. The instrument is useful for assaying , mining and for metallurgical, quarrying, aggregate processing, chemical, geological and industrial Laboratories. It is a self contained grinder, with a rotary disc, having a planetary movement in a vertical plane. This feature gives added life to the moving parts and produces a sample of uniform fineness.

Grinding is done between two discs-one stationery and the other revolving eccentrically at high speed. The discs are made from heat treated machinate metal. With the help of a convenient hand wheel, the size of the final product can be adjusted. This can be done, even while the machine is in operation. A self locking device holds the hinged grinding chamber in place and affords easy and quick access to it, for removal of ground samples and for cleaning.

Additional Information:

• Item Code: ASI-235